[New-Version]High Quality Braindump2go 7220X Exam VCE and PDF 75Q Free Share[Q32-Q42]

2018 January New Avaya 7220X Exam Dumps with PDF and VCE Free Updated Today! Following are some new 7220X Exam Questions:

1.|2018 New Avaya 7220X Exam Dumps (PDF & VCE) 75Q&As Download:
https://www.braindump2go.com/7220x.html
2.|2018 New Avaya 7220X Exam Questions & Answers Download:
https://drive.google.com/drive/folders/1JnDbgCzOyM8n3jzC-h2paRntJRFNDxXl?usp=sharing

QUESTION 32
A customer has just configured Avaya Aura® Media Server (AAMS) on their Avaya Aura® Communication Manager (CM).
They are saying that the AAMS is never being used by CM, but instead is always using the G450 gateways to provide DSP resources.
The customer has checked the status of the Media Server and the Signaling Group and both show In- Service.
They have also checked that a Media Server License is installed on WebLM, and the status of the Media Server is showing Element Status as being normal.
Which statement describes the cause of this problem?

A. The CM license has no CM Media Server VoIP Channels.
B. No trunk-group members have been configured,
C. The VoIP Channel License Limit has not been set on the media-server CM SAT screen.
D. The Dedicated VoIP Channel Licenses has not been set on the media-server CM SAT screen.

Answer: A

QUESTION 33
What is the name of the packets capturing utility embedded in most Linux Servers, including Avaya Aura® Communication Manager (CM)?

A. wshark
B. cshark
C. pcap
D. tshark

Answer: D

QUESTION 34
Which Linux command allows you to view the installed certificates on Aura® Communication Manager (CM)?

A. tlscertmanage
B. show certs
C. displaycertificates
D. start certmanager -f

Answer: A

QUESTION 35
How can an inactive SM100 be reset?

A. Click the repair button on the Replication page with the affected Avaya Aura® Session Manager (SM) selected.
B. Click the ‘Reset’ button on the Security Module Status page in Avaya Aura® System Manager (SMGR).
C. Run the resetSM100 command from RHEL Command Line Interface of Avaya Aura® Session Manager (SM)
D. Restart Services on the Avaya Session Border Controller for Enterprise (SBCE).

Answer: C

QUESTION 36
A customer states they are having voice quality issues when they make calls over a WAN link.
You would like see what the Quality of Service is for a call, as the customer makes the call.
Which Avaya Aura® Communication Manager (CM) SAT command will display packet loss and jitter for a call in progress?

A. monitor station qos xxxx, where XXXX is the station number
B. list monitor qos
C. status station qos xxxx, where XXXX is the station number
D. list trace station xxxx, where XXXX is the station number.

Answer: D

QUESTION 37
Which two methods are used to obtain Avaya Aura® Communication Manager (CM) software version information? (Choose two.)

A. In CM SMI, navigate to Administration > Server Maintenance > Server > Software Version.
B. In Avaya Aura® System Manager (SMGR), navigate to Services>; Inventory>; Managed Elements.
C. In Linux, issue the swversion. command.
D. In Linux, issue the software version show.command.
E. In CM SAT, issue the display software version. command.

Answer: AC

QUESTION 38
When viewing Avaya Aura® Communication Manager (CM) trusted certificates, you notice that the installed certificates are marked with either A, C, W, or R.
What do these letters stand for?

A. Accepted, Confirmed, Whitelisted and Rejected
B. Accumulated, Compressed, Write and Read
C. Authentication, Authorization and Accounting Services, Communication Manager, WEB Server and Remote Logging.
D. Authentication, Access and Accounting Services, Communication Manager, Web Server and Remote logging.

Answer: C

QUESTION 39
How can you view the entire contents of the current Avaya Aura® Communication Manager CM call processing log file?

A. by using the CM SAT to enter the list callp log all commands
B. by using the Linux cd to /var/log/Avaya and cat ecs.log commands
C. by using the Linux cd to /var/log/esc and ls -l commands to find current <log filename>; cat <log file name>
D. by using the CM SAT to enter the display callproc log all command
E. by using the Linux cd to /var/log/Avaya and cat callproc.log commands

Answer: E
Explanation:

QUESTION 40
In which three states can an Avaya Aura® System Manager (SMGR) Alarm exist? (Choose three.)

A. Active
B. Raised
C. Resolved
D. Acknowledged
E. Cleared

Answer: BDE

QUESTION 41
Which event triggers the activation of Avaya Aura® Communication Manager (CM) Survivable Server so it can accept H.323 registrations and/or make IP trunks active?

A. a broadcast message from the Main CM Server right before it goes in failure
B. the first H.323 Registration Request the CM Survivable Server receives from any H.323 Endpoint, after the Endpoint loses contract with the Main CM Server
C. the interruption in the RAS keep alive link between CM Main and CM Survivable Servers
D. the availability of DSP Resources in the CM Survivable Server, the registration of either a Media Gateway or an Avaya Aura® Media Server with that CM Survivable Server.

Answer: D

QUESTION 42
Refer to the Exhibit. Which two statements are true about a call from AST 1011111 to AST 1011112? (Choose two.)

A. In step 3, Avaya Aura®Communication Manager (CM) sends SIP Options to 1011112 looking for a 200 ok response to check it is reachable.
B. In step 2, Avaya Aura® Session Manager (SM) matches 1011111 with a Communication Profile, and uses the defined Originating Application Sequence to route the call to Avaya Aura® Communication Manager.
C. In step 1, when 1011111 draws dial tone it sends an Invite to Avaya Aura® Session Manager (SM) with the Request URI containing 1011111.
D. In step 2, the Avaya Aura® Session Manager (SM) uses a dial pattern and routing policy to route the call to Avaya Aura® Communication Manager (CM).

Answer: BC


!!!RECOMMEND!!!

1.|2018 New Avaya 7220X Exam Dumps (PDF & VCE) 75Q&As Download:
https://www.braindump2go.com/7220x.html
2.|2018 New Avaya 7220X Study Guide Video:
https://youtu.be/8qI-7B_cuqU