[April-2016-Updated]Microsoft Exam 70-412 392Q&As Free Downloading from Braindump2go
2016 April New 70-412 Questions and Answers Updated Today!
QUESTION
Your network contains an Active Directory domain named adatum.com.
The domain contains two domain controllers that run Windows Server 2012 R2.
The domain controllers are configured as shown in the following table.
You log on to DC1 by using a user account that is a member of the Domain Admins group, and then you create a new user account named User1.
You need to prepopulate the password for User1 on DC2.
What should you do first?
A. Connect to DC2 from Active Directory Users and Computers.
B. Add DC2 to the Allowed RODC Password Replication Policy group.
C. Add the User1 account to the Allowed RODC Password Replication Policy group.
D. Run Active Directory Users and Computers as a member of the Enterprise Admins group.
Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/cc730883(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/cc753470(v=ws.10).aspx#BKMK_pre
QUESTION
Your company has offices in Montreal, New York, and Amsterdam.
The network contains an Active Directory forest named contoso.com.
An Active Directory site exists for each office.
All of the sites connect to each other by using the DEFAULTIPSITELINK site link.
You need to ensure that only between 20:00 and 08:00, the domain controllers in the Montreal office replicate the Active Directory changes to the domain controllers in the Amsterdam office. The solution must ensure that the domain controllers in the Montreal and the New York offices can replicate the Active Directory changes any time of day.
What should you do?
A. Create a new site link that contains Montreal and Amsterdam.
Remove Amsterdam from DEFAULTIPSITELINK.
Modify the schedule of DEFAULTIPSITELINK.
B. Create a new site link that contains Montreal and Amsterdam.
Create a new site link bridge.
Modify the schedule of DEFAU LTIPSITELINK.
C. Create a new site link that contains Montreal and Amsterdam.
Remove Amsterdam from DEFAULTIPSITELINK.
Modify the schedule of the new site link.
D. Create a new site link that contains Montreal and Amsterdam.
Create a new site link bridge.
Modify the schedule of the new site link.
Answer: C
Explanation:
Very Smartly reworded with same 3 offices.
In the exam correct answer is “Create a new site link that contains Newyork to Montreal.
Remove Montreal from DEFAULTIPSITELINK.Modify the schedule of the new site link”.
http://technet.microsoft.com/en-us/library/cc755994(v=ws.10).aspx
QUESTION
Your network contains two Active Directory forests named contoso.com and adatum.com.
A two- way forest trust exists between the forests.
The contoso.com forest contains an enterprise certification authority (CA) named Server1.
You implement cross-forest certificate enrollment between the contoso.com forest and the adatum.com forest. On Server1, you create a new certificate template named Template1.
You need to ensure that users in the adatum.com forest can request certificates that are based on Template1.
Which tool should you use?
A. DumpADO.ps1
B. Repadmin
C. Add-CATemplate
D. Certutil
E. PKISync.ps1
Answer: E
Explanation:
B. Repadmin.exe helps administrators diagnose Active Directory replication problems between
domain controllers running Microsoft Windows operating systems.
C. Adds a certificate template to the CA.
D. Use Certutil.exe to dump and display certification authority (CA) configuration information, configure Certificate Services, backup and restore CA components, and verify certificates, key pairs, and certificate chains.
E. PKISync.ps1 copies objects in the source forest to the target forest
http://technet.microsoft.com/en-us/library/ff955845(v=ws.10).aspx#BKMK_Consolidating
http://technet.microsoft.com/en-us/library/cc770963(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh848372.aspx
http://technet.microsoft.com/library/cc732443.aspx
http://technet.microsoft.com/en-us/library/ff961506(v=ws.10).aspx
QUESTION
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has the Windows Deployment Services server role installed.
You back up Server1 each day by using Windows Server Backup.
The disk array on Server1 fails.
You replace the disk array.
You need to restore Server1 as quickly as possible.
What should you do?
A. Start Server1 from the Windows Server 2012 R2 installation media.
B. Start Server1and press F8.
C. Start Server1 and press Shift+F8.
D. Start Server1 by using the PXE.
Answer: A
Explanation:
A. Recovery of the OS uses the Windows Setup Disc
http://technet.microsoft.com/en-us/library/cc753920.aspx
http://www.windowsnetworking.com/articles_tutorials/Restoring-Windows-Server-BareMetal.html
QUESTION
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connect to each other by using a high-latency WAN link.
Server2 hosts a virtual machine named VM1.
You need to ensure that you can start VM1 on Server1 if Server2 fails.
The solution must minimize hardware costs.
What should you do?
A. On Server1, install the Multipath I/O (MPIO) feature.
Modify the storage location of the VHDs for VM1.
B. From the Hyper-V Settings of Server2, modify the Replication Configuration settings.
Enable replication for VM1.
C. On Server2, install the Multipath I/O (MPIO) feature.
Modify the storage location of the VHDs for VM1.
D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings.
Enable replication for VM1.
Answer: D
Explanation:
You first have to enable replication on the Replica server–Server1–by going to the server and modifying the “Replication Configuration” settings under Hyper-V settings.
You then go to VM1– which presides on Server2– and run the “Enable Replication” wizard on VM1.
QUESTION
Your network contains an Active Directory domain named contoso.com.
You deploy a server named Server1 that runs Windows Server 2012 R2.
A local administrator installs the Active Directory Rights Management Services server role on
Server1.
You need to ensure that AD RMS clients can discover the AD RMS cluster automatically.
What should you do?
A. Run the Active Directory Rights Management Services console by using an account that is a member
of the Schema Admins group, and then configure the proxy settings.
B. Run the Active Directory Rights Management Services console by using an account that is a member
of the Schema Admins group, and then register the Service Connection Point (SCP).
C. Run the Active Directory Rights Management Services console by using an account that is a member
of the Enterprise Admins group, and then register the Service Connection Point (SCP).
D. Run the Active Directory Rights Management Services console by using an account that is a member
of the Enterprise Admins group, and then configure the proxy settings.
Answer: C
Explanation:
* The Active Directory Rights Management Services (AD RMS) Service Connection Point (SCP) is an object in Active Directory that holds the web address of the AD RMS certification cluster. AD RMS-enabled applications use the SCP to discover the AD RMS service; it is the first connection point for users to discover the AD RMS web services.
* To register the SCP you must be a member of the local AD RMS Enterprise Administrators group and the Active Directory Domain Services (AD DS) Enterprise Admins group, or you must have been given the appropriate authority.
QUESTION
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2012 R2. All three servers have the Hyper-V server role installed and the Failover Clustering feature installed. Server1 and Server2 are nodes in a failover cluster named Cluster1.
Several highly available virtual machines run on Cluster1.
Cluster1 has the Hyper-V Replica Broker role installed.
The Hyper-V Replica Broker currently runs on Server1.
Server3 currently has no virtual machines.
You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replica server for Cluster1.
Which two tools should you use? (Each correct answer presents part of the solution. Choose two.)
A. The Hyper-V Manager console connected to Server3
B. The Failover Cluster Manager console connected to Server3
C. The Hyper-V Manager console connected to Server1.
D. The Failover Cluster Manager console connected to Cluster1
E. The Hyper-V Manager console connected to Server2
Answer: AD
Explanation:
http://technet.microsoft.com/en-us/library/jj134240.aspx
QUESTION
You have a file server named Server1 that runs Windows Server 2012 R2.
The folders on Server1 are configured as shown in the following table.
A new corporate policy states that backups must use Microsoft Online Backup whenever possible.
You need to identify which technology you must use to back up Server1.
The solution must use Microsoft Online Backup whenever.
What should you identify? To answer, drag the appropriate backup type to the correct location or locations. Each backup type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation:
http://technet.microsoft.com/en-us/library/hh831761.aspx
QUESTION
You have a DNS server named Server1 that runs Windows Server 2012 R2.
Server1 has a signed zone for contoso.com.
You need to configure DNS clients to perform DNSSEC validation for the contoso.com DNS domain.
What should you configure?
A. The Network Connection settings
B. A Name Resolution Policy
C. The Network Location settings
D. The DNS Client settings
Answer: B
Explanation:
B. In a DNSSEC deployment, validation of DNS queries by client computers is enabled through
configuration of IPSEC & NRPT
http://technet.microsoft.com/en-us/library/ee649182(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/ee649136(v=ws.10).aspx
QUESTION
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
On DC1, you open DNS Manager as shown in the exhibit. (Click the Exhibit button.)
You need to change the replication scope of the contoso.com zone.
What should you do before you change the replication scope?
A. Modify the Zone Transfers settings.
B. Add DC1 to the Name Servers list.
C. Add your user account to the Security settings of the zone.
D. Unsign the zone.
Answer: D
Explanation:
Lock icon signifies that the Zone has been signed. Changes to the zone are blocked when signed
http://www.microsoft.com/en-us/download/dlx/ThankYou.aspx?id=29018
2016 New 70-412 Study Materials Recommendation:
1.2016 Microsoft 70-412 PDF and VCE Dumps 392q from Braindump2go: http://www.braindump2go.com/70-412.html
2.2016 Microsoft Questions and Answers PDF from Google Drive: Google.com